top of page

Our restoration team can make your piano better-than-new.

Pianos Unlimited specializes in the restoration of fine pianos.


With our commitment to excellence, we will remanufacture your piano to better-than-original factory-new condition. Every technical aspect of the restoration process is performed by skilled craftsman (Registered Piano Technicians) who employ age-old craftsmanship to bring your piano back to its former glory.


The complete remanufacturing of your piano includes all new action parts, new soundboard (if needed), re-plated hardware, and a new finish. We use the highest quality replacement parts in our restoration process for high-end suppliers; depending on customer preference and the individual needs of the instrument.


For more information please email us here

Call us at (800) 201-4551 or 620-474-1194


Or visit our Showroom / Warehouse at: 
900 North Main Street

Hutchinson, Kansas 67501 (view map)


We use:

  • Renner, Abel & Ronson parts upon request

  • Sitka Spruce soundboards

  • Custom made bass strings

  • The highest quality lacquer or polyester finishes found in America

  • A custom balancing system of all action components to provide the ultimate in action control and piano tone


We provide:

  • Nationwide pickup and delivery

  • After-delivery piano service

  • 5-year warranty on all replaced components

The Restoration Process



The first step in the restoration process is to disassemble the piano completely. Precise measurements of internal components are made before removal to be diagnosed at a later step in the restoration process. All strings and tuning pins are removed followed by the soundboard and pinblock. Following disassembly any of the structural components that do not meet new standards are repaired and the structural part of the case is ready for the cabinet / exterior restoration.

Cabinet Restoration


The existing exterior finish is removed, damaged veneer and / or carvings are repaired or replaced and a closed pore lacquer finish is applied and hand-finished to perfection. All brass hardware is buffed and nickel hardware is re-plated. The original manufactures logos are applied.



Plate Restoration


The cast iron plate is carefully inspected and repaired where necessary prior to being re-gilded. New agraffes are installed and the capo bar is reshaped or replaced as necessary. All raised lettering is repainted by hand and model and serial numbers are repainted on the plate using new laser-cut stencils custom-made for each instrument.



New Soundboard


A new diaphramized sitka spruce soundboard is installed and the bridges received new maple caps. They are then drilled, notched, and pinned after being planed to the appropriate height for the correct downbearing. Damper guide rails are re-bushed and ready for installation during stringing.






New plain-wire strings are now installed followed by the finest bass strings made from JD Grandt.




Action Restoration


Only necessary repairs are made to the keys; including new keybushings, backchecks, tops, or an entirely new custom-made keyset, if needed. Renner, or Abel action parts are available as custom options. Dampers are re-finished and re-felted. The action in now regulated and balanced to provide a smooth and even touch-weight that is highly responsive and easily controlled at all dynamic levels.




Piano Slider Yamaha.jpg

Tuning and Voicing


This is the final step in the restoration process. The piano is tuned to A440 and voiced to produce optimal color, tone, and power; ready for delivery to its home or venue where the final adjustments will be made.


For more information please email us here.

Call us at (800) 201-4551 or (620) 474-1194


Or visit our Showroom / Warehouse at: 
900 North Main Street

Hutchinson, Kansas 67501 (view map)


bottom of page